Worth Data RF Terminal 7000 Spezifikationen Seite 43
- Seite / 103
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
The color codes are:
0 = AQUA 1 = BLACK 2 = BLUE 3 = FUCHSIA
4 = GRAY 5 = GREEN 6 = LIME 7 = MAROON
8 = NAVY 9 = OLIVE A = PURPLE B = RED
C = SILVER D = TEAL E = WHITE F = YELLOW
Here are some examples:
@CS2M2L2
will clear the screen and set the first two lines of the screen to be small fonts, the next two lines to be medium
fonts, and the next two lines to be large fonts. The remaining undefined lines will be small font with the default
colors. The default colors will be used since there is no \cb at the end of the command.\
followed by:
@1,1,0,\BEWarning@3,1,0,\21Invalid Data@5,1,1,\ACData<EOT>
will display “Warning” on the first line in small font with RED text on a WHITE background, “Invalid Data” on
the third line in medium font with BLUE text on a BLACK background and “Data” on the 5
th
line in large font
with PURPLE text on a SILVER background. The cursor will be positioned after the “Data” on the 5
th
line and
entered text will be in the last color combination, PURPLE on SILVER.
Remember that if you only define 6 lines then the remaining lines on the screen will be defined as small font
with the default colors.
When you are defining the font size for each line of the screen be aware that the total pixel count of all the lines
defined cannot exceed the height of the screen.
The total height of the screen is 240 pixels. A small font is 16 pixels tall, a medium font is 24 pixels tall and a
large font is 32 pixels tall.
If you define 2 lines with small fonts, 2 lines with medium fonts and 2 lines with large fonts you will be using
(2x16)+(2x24)+(2x32)=144 pixels out of a maximum of 240 pixels. The top 144 pixels of the display will be
used, the bottom 96 pixels will be divided into 6 lines (96/16=6) of small font..
If you attempt to define a combination of fonts that exceeds 240 pixels total, a ? will be returned to the host for
invalid command.
Here are some more examples:
@C\E1
will clear the screen and set the default colors to WHITE text on a BLACK background. In concept, @C\E1 is
the same as @C0\E1; however, @C0\E1 is an invalid command. The change of user colors is always embedded
in a Clear Screen Command.
@CS1M3L1S1L2\BE
will clear the screen and set the first line to be small font, the next 3 lines to be medium font, the next line to be
large font, the next line to be small font and the last two lines to be large font with RED text on a WHITE
- Table of Contents 3
- Introduction 5
- Differences 5
- Chapter 1: Installation 7
- RF Terminal Operation 9
- (requires GWBasic or QBasic) 12
- RF System Setup 14
- RF Configuration 15
- Default Channel 16
- Bar Code Options 17
- RS-232 Settings: 21
- Bluetooth Settings: 22
- Date & Time Setting 23
- Speaker Settings 23
- Laser Options 24
- LCD Options 25
- Other Settings 26
- System Tools 29
- Base and Relay Setup 30
- Operational Theory 31
- How Site Survey works 34
- Performance Issues 35
- Relay Stations 36
- Before you begin programming… 39
- Failure Planning 40
- 2+ Command(s) ** 41
- Command 42
- Command function 42
- Base Station Error Feedback 49
- Byte position 50
- PromptCOM/ActiveX 53
- Concepts - TCP/IP COM 62
- OnTermEndKey 67
- Input method 67
- OnTermSearchKey 67
- Portable Printers 68
- Voice Message Operations 70
- ITEM #01 71
- QUANTITY #02 71
- LOW BATTERIES #98 71
- TRANSMISSION FAILED #99 71
- Troubleshooting 72
- Terminal Error Messages 73
- RF Terminal Problems 75
- Problems reading Bar Codes 75
- Problems with Voice Prompts 76
- If you still have a problem… 76
- RMA #XXXXXX 77
- Worth Data Inc 77
- 623 Swift St 77
- Santa Cruz, CA 95060 77
- 831-458-9938 77
- Appendixes 78
- Channel and Jumper Changes 78
- Adding Relays 80
- RF Serial Pin-outs 84
- Relay Station RS422 Pin-outs 85
- Firmware Upgrades 86
- Code 39 Specifications 87
- Code 93 Specifications 90
- Codabar Specifications 91
- Code 128 Specifications 92
- UPC / EAN Specifications 95
- ISBN 0-553-37062 96
- If the code 97
- Position 97
- 10 digit code 97
- • Data with check digit is: 99
- 943457823 99
- How to scan a bar code 100
- ASCII Code Equivalent Table 102
Verwandte Produkte und Handbücher für Barcodeleser Worth Data RF Terminal 7000
(58 Seiten)Samsung DVD-HD860 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Nein Samsung DVD-HD860.
Wir stellen 1 PDF-Handbücher Samsung DVD-HD860 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Kommentare zu diesen Handbüchern