Worth Data RF Laser Spezifikationen PDF herunterladen (Seite 36)

2-21

Reset

While in Setup Mode, DO NOT scan the RESET bar code unless you want to

set all of the RF Terminal setup parameters back to the factory default settings.

Scanning RESET will erase all changes you have made.

The following serial parameters Baud Rate, Parity, Data Bits, and Stop Bits apply only to

firmware updates and a portable printer such as the Cameo and QL3 printers.

Baud Rate

300 0

600 1

1200 2

2400 3

4800 4

9600 5

19,200

Parity

None 0

Even 1

Odd 2

• None is generally used with 8 data bits

• Even or Odd parity is generally used with 7 data bits.

Data Bits

7 bits 0

8 bits 1

Stop Bits

1 bit 0

2 bits 1

Protocol

None 0

XON/XOFF 1

Maintain backward compatibility for illegal statement handling E

Illegal statement handling for current versions F

• Settings 0 and 1 pertain to use of a serial Printer with your RF Terminal.

Use setting 1 for XON / XOFF if your serial Printer supports it. It DOES

NOT apply to the Cameo and QL3 Printers.

S232

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 154 155

Keine Kommentare

Worth Data RF Laser Spezifikationen Seite 36