Worth-data Serial Bar Code Reader RS-232 Bedienungsanleitung PDF herunterladen

RS-232 Serial Bar Code Reader

QuickStart and Installation Guide

WDR Reader

WDR Reader Installation - Host & Terminal

If you attach the WDR R22 Reader between your computer and a terminal,

as shown below, using the F45-1 Serial Y Cable, bar code data will display

on the terminal as if it had been typed.

The F45-1 Serial Y Cable

assumes you already have a

dumb ASCII terminal connect-

ed to a host computer. Unplug

the host cable from the termi-

nal and plug it into the DB25

Female cable end on the F45-1

cable. Connect the other 25

pin end of the F45-1 Y Cable

to the terminal (where the host

cable was plugged previously).

The WDR R22 now sits in-

between the terminal and host

acting as a wedge reader; data

scanned is echoed back by the

host to the terminal screen.

The WDR reader must be con-

figured so that the Baud Rate,

Data Bits, Stop Bits and Parity

match the settings on the ter-

minal. You may need to consult your terminal’s documentation to deter-

mine how those settings are viewed on the terminal. Once you know what

the settings are, you can use the bar coded WDR Setup Menu to make any

necessary changes.

For configuration settings and details, see the PDF Users Guide on the

Utility CD provided with the reader.

1 2

RS-232 Serial Bar Code ReaderQuickStart and Installation GuideWDR ReaderWDR Reader Installation - Host & TerminalIf you attach the WDR R22 Reader

Introduction Worth Data's WDR Readers are versatile serial bar code readers designedfor use with all micro and minicomputers. The WDR Model R22 c

Keine Kommentare

Worth-data Serial Bar Code Reader RS-232 Bedienungsanleitung